Tacoma PreRunner Extra Cab 2WD L4-2.7L (3RZ-FE) (1998)
/Page-440001.png)
Catalytic Converter: Service and Repair
REPLACEMENT
1. REMOVE CONVERTER
(a) Jack up the vehicle.
(b) Check that the converter is cool.
(c) Remove the bolts and nuts at the front and rear of the converter.
(d) Remove the converter and gasket.
2. REINSTALL CONVERTER
(a) Place new gaskets on the converter front and rear pipes and connect the converter the exhaust pipes.
(b) Torque the bolts and nuts.
Torque: 48 N.m (490 kgf.cm, 35 ft.lbf)
