Tacoma PreRunner Extra Cab 2WD L4-2.7L (3RZ-FE) (1998)
Camshaft Position Sensor: Testing and Inspection
CAMSHAFT POSITION SENSOR INSPECTION
(a) Disconnect the camshaft position sensor connector.
(b) Using an ohmmeter, measure the camshaft position sensor resistance between terminals.
Resistance:
Cold: 835 - 1,400 ohms
Hot: 1,060 - 1,645 ohms
If the resistance is not as specified, replace the camshaft position sensor.
(c) Connect the camshaft position sensor connector.