Tacoma PreRunner Extra Cab 2WD L4-2.7L (3RZ-FE) (1998)
/Page-881001.png)
Camshaft Position Sensor: Service and Repair
REMOVAL
1. REMOVE THROTTLE BODY
2. REMOVE CAMSHAFT POSITION SENSOR
(a) Disconnect the camshaft position sensor connector.
(b) Remove the bolts and camshaft position sensor.
Torque: 5.4 N.m (55 kgf.cm, 48 in.lbf)
INSTALLATION
Installation is in the reverse order of removal.
