Tacoma PreRunner Extra Cab 2WD L4-2.7L (3RZ-FE) (1998)
Air Flow Meter/Sensor: Service and Repair
REMOVAL
1. REMOVE AIR CLEANER CAP WITH MAF METER
(a) Disconnect the MAF meter connector and wire clamp.
(b) Loosen the air cleaner hose clamp.
(c) Disconnect the air hose from air cleaner cap.
(d) Loosen the 4 clips and remove the air cleaner cap together with the MAF meter.
2. REMOVE MAF METER FROM AIR CLEANER CAP
Remove the 4 nuts, MAF meter and gasket.
INSTALLATION
1. INSTALL MAF METER TO AIR CLEANER CAP
(a) Place a new gasket on the air cleaner cap.
(b) install the MAF meter with the 4 nuts.
Torque: 8.5 N.m (85 kgf.cm1 74 in.lbf)
2. INSTALL MAF METER WITH AIR CLEANER CAP