Tacoma PreRunner Extra Cab 2WD L4-2.7L (3RZ-FE) (1998)
4. REINSTALL TERMINAL KIT PARTS
a. Terminal 30:
Install these new parts:
1. Insulation paper
2. Terminal insulator (inside)
NOTE: Be careful to install the terminal insulator in the correct direction.
3. Contact plate
4. Terminal bolt
5. O-ring
6. Packing and terminal insulator (outside)
Install the packing to the terminal insulator, and install them.
HINT: Match the protrusion of the insulator with the indentation of the housing.
7. Wave washer
8. Terminal nut
b. Terminal C:
Install these new parts: A
1. Terminal insulator (inside)
NOTE: Be careful to install the terminal insulator in the correct direction.
2. Contact plate
3. Terminal bolt
4. O-ring
5. Terminal insulator (outside)
6. Wave washer
7. Terminal nut