toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Fluid Pan, A/T > < Fluid - A/T|Capacity Specifications|Page 3534
Page 1
background image

Fluid - A/T: Service and Repair

1.

Operate vehicle, allow transmission fluid temperature to reach 158-176 °F.

2.

Position vehicle on level surface, apply parking brake.

3.

Allow engine to idle, depress brake pedal, then move shift lever through all positions.

4.

Remove transaxle dipstick, wipe clean, then replace.

5.

Remove again, then check fluid level in HOT range.

NOTICE:  Do not overfill.

(a) Check the fluid condition. If the fluid smells burnt or is black, replace it.

(b) Replace the ATF.

(1) Remove the drain plug and drain the fluid.
(2) Reinstall the drain plug securely.

7.

On A340D units:
Dry capacity is 6.9 US quarts.
Drain and Refill:  2.4 Liters (2.5 US qts, 2.1 Imp. qts.)

8.

On A340E units:
Dry capacity is 7.6 US quarts.
Drain and Refill:  1.6 Liters (1.7 US qts, 1.4 Imp. qts.)

9.

On A340F units:
Dry capacity 1996 9.3 US quarts.
Dry capacity 1997-99 10.7 US quarts.
Drain and Refill:  2.0 Liters (2.1 US qts, 1.8 Imp. qts.)

10.

On A340H units, dry capacity for transaxle and transfer is 10.9 US quarts.

Fluid Pan, A/T > < Fluid - A/T|Capacity Specifications|Page 3534