Tacoma PreRunner Extra Cab 2WD L4-2.7L (3RZ-FE) (1998)
/Page-1104001.png)
Transmission Position Switch/Sensor: Service and Repair
ON-VEHICLE REPAIR
1
DISCONNECT 2 OIL COOLER PIPES
2. DISCONNECT PARK/NEUTRAL POSITION SWITCH CONNECTOR
a. Pry off the lock washer and remove the nut.
b. Remove the bolt and pull out the park/neutral position switch.
3. INSTALL AND ADJUST PARK/NEUTRAL POSITION SWITCH
4. CONNECT PARK/NEUTRAL POSITION SWITCH CONNECTOR
5. CONNECT 2 OIL COOLER PIPES
