toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Drive Axles, Bearings and Joints > < Seals and Gaskets, Differential|Service and Repair|Page 2447
Page 5
background image

14. ADJUST DRIVE PINION PRELOAD
15. STAKE DRIVE PINION NUT
16. CONNECT REAR PROPELLER SHAFT

17. FILL DIFFERENTIAL WITH HYPOID GEAR OIL

Torque: 49 Nm (500 kgf-cm, 39 ft. lbs.) 
Oil type: Hypoid gear oil API GL-5 

Recommended oil viscosity:

Above-18°C (0°F) SAE 90 
Below -18°C (0°F) SAE80W or 80W-90 

Capacity: 

Drive Axles, Bearings and Joints > < Seals and Gaskets, Differential|Service and Repair|Page 2447