Tacoma PreRunner Reg Cab 2WD L4-2.7L (3RZ-FE) (1999)
/Page-424005.png)
b. Remove the 4 bolts and A/C compressor bracket.
7. REMOVE GENERATOR, ADJUSTING BAR AND BRACKET
a. Disconnect the generator connector.
b. Remove the nut, and disconnect the generator wire and wire clip.
c. Remove the lock, pivot bolts and the generator.
d. Remove the bolt and adjusting bar.
e. Remove the 3 bolts and generator bracket.
8. REMOVE CRANKSHAFT POSITION SENSOR
a. Remove the 2 bolts and crankshaft position sensor.
b. Remove the O-ring from the crankshaft position sensor.
9. 2WD: REMOVE STIFFENER PLATES
Remove the 8 bolts and stiffener plates.
10. REMOVE FLYWHEEL HOUSING UNDER COVER AND DUST SEAL
