Tacoma PreRunner Reg Cab 2WD L4-2.7L (3RZ-FE) (1999)
Compressor Clutch: Service and Repair
DISASSEMBLY
1. REMOVE PRESSURE PLATE
a. Using SST and a socket wrench, remove the shaft bolt.
Torque: 13.2 N.m (135 kgf.cm, 9 ft.lbf)
b. Install SST on the pressure palate.
SST 07112-66040
c. Using SST and socket wrench, remove the pressure plate.
d. Remove the shims from the pressure palate.
2. REMOVE ROTOR