Tacoma PreRunner Reg Cab 2WD L4-2.7L (3RZ-FE) (1999)
/Page-93002.png)
Resistance: Refer to the chart graph
If the resistance is not as specified, replace the ECT sensor.
4. REINSTALL ECT SENSOR
a. Using a 19 mm deep socket wrench, install the ECT sensor and gasket.
Torque: 20 Nm (200 kg.cm, 14 ft.lb)
b. Connect the ECT sensor connector.
c. Install the engine wire protector to the 3 brackets.
5. REFILL ENGINE COOLANT
