Tacoma PreRunner Reg Cab 2WD L4-2.7L (3RZ-FE) (1999)
a. Remove the 2 screws.
Torque:
1.4 kW type: 5.9 Nm (60 kg.cm, 52 in.lb)
2.0 kW type: 9.3 Nm (93 kg.cm, 82 in.lb)
b. Remove these parts from the magnetic switch assembly:
1. Starter housing
2. Return spring
3. Clutch assembly
4. Idler gear
5. Bearing
3. REMOVE STEEL BALL
Using a magnetic finger, remove the steel ball from the clutch shaft hole.
4. REMOVE BRUSH HOLDER
a. Remove the 2 screws and end cover from the field frame.
Torque:
1.4 kW type: 1.5 Nm (15 kg.cm, 13 in.lb)
2.0 kW type: 3.8 Nm (38 kg.cm, 34 in.lb)