toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Steering Wheel|Service and Repair > < Collision / Non-Collision Inspections|Page 5573
Page 1
background image

Steering Wheel: Testing and Inspection
Steering Effort and Steering Wheel Freeplay

INSPECTION 

1. CHECK STEERING WHEEL FREEPLAY 

With the vehicle stopped and tires facing straight ahead, rock the steering wheel gently back and forth with light finger pressure. Freeplay should
not exceed the maximum.

Maximum freeplay: 30 mm (1.18 inch) 

2. CHECK STEERING EFFORT

a. Center the steering wheel. 
b. Remove the steering wheel pad. 
c. Start the engine and run it at idle. 
d. Measure the steering effort in both directions.

Reference: 4.9 Nm (50 kgf-cm, 43 inch lbs.)  

HINT:  Be sure to consider the tire type, pressure and contact surface before making your diagnosis. 

e. Torque the steering wheel set nut.

Torque: 35 Nm (360 kgf-cm, 26 ft. lbs.)  

f.

Install the steering wheel pad.

Steering Wheel|Service and Repair > < Collision / Non-Collision Inspections|Page 5573