Tacoma Regular Cab 2WD L4-2.4L (2RZ-FE) (2000)
Sliding Roof: Service and Repair
REMOVAL
1. REMOVE SUNSHADE TRIM
2. REMOVE LOCK HANDLE AND LOCK BASE
a. Remove the 2 screws and lock garnish.
b. Remove the lock handle and holders with 2 bolts.
Torque: 2.9 N.m (30 kgf.cm, 26 in.lbf)
c. Remove the lock base and spacer with 2 screws.
Torque: 5.9 N.m (60 kgf.cm, 52 in.lbf)
3. REMOVE WIND DEFLECTOR PANEL
a. Remove the clip as shown in the illustration.
b. Using a screwdriver, remove the wind deflector panel as shown in the illustration.
c. Employ the same manner described above to the other side.