Tacoma Regular Cab 2WD L4-2.4L (2RZ-FE) (2000)
/Page-844001.png)
Brake Master Cylinder: Service and Repair
Removal and Installation
REMOVAL
1. DISCONNECT LEVEL WARNING SWITCH CONNECTOR
2. TAKE OUT FLUID WITH SYRINGE
NOTICE: Do not let brake fluid remain on a painted surface. Wash it off immediately.
3. DISCONNECT BRAKE LINES
Using SST, disconnect the 5 brake lines.
SST 09023-00100
Torque: 15 Nm (155 kgf-cm, 11 ft. lbs.)
