Tacoma Regular Cab 2WD L4-2.4L (2RZ-FE) (2000)
/Page-842001.png)
Load Compensator: Service and Repair
Disassembly and Assembly
DISASSEMBLY
1. REMOVE VALVE BRACKET
a. Remove the nut, bolt and 2 plate washers.
b. 2WD: Remove the 2 nuts and flexible hose bracket, and remove the valve bracket and set plate from the valve body.
c. 4WD and Pre runner: Remove the 2 nuts, and remove the valve bracket and set plate from the valve body.
