Tacoma Regular Cab 2WD L4-2.4L (2RZ-FE) (2000)
/Page-292017.png)
a) Install the No.1 damper with the bolt and nut.
Torque: 29 Nm (300 kgf-cm, 22 ft. lbs.)
b) Install the slipper with the bolt.
Torque: 27 Nm (270 kgf-cm, 20 ft. lbs.)
c) Check that the slipper moves smoothly.
7. INSTALL CRANKSHAFT TIMING SPROCKET
HINT: If necessary, install the sprocket with SST.
SST 09636-20010
8. INSTALL NO.1 TIMING CHAIN AND CAMSHAFT TIMING SPROCKET
a) Align the timing mark between the mark link of the No.1 timing chain, and install the No.1 timing chain to the timing sprocket.
b) Align the timing mark of the crankshaft timing sprocket with the mark link of the No.1 timing chain and install the No.1 timing chain.
c) Tie the No.1 timing chain with a cord as shown in the illustration, and make sure it doesn't come loose.
9. INSTALL TIMING CHAIN COVER
