Tacoma Regular Cab 2WD L4-2.4L (2RZ-FE) (2000)
/Page-1011001.png)
Compressor Clutch: Service and Repair
Disassembly and Reassembly
DISASSEMBLY
1. REMOVE PRESSURE PLATE
a. Using SST and a socket wrench, remove the shaft bolt.
Torque: 13.2 Nm (135 kg.cm, 9 ft.lb)
b. Install SST on the pressure palate.
SST 07112-66040
c. Using SST and socket wrench, remove the pressure plate.
d. Remove the shims from the pressure palate.
