Tacoma Regular Cab 2WD L4-2.4L (2RZ-FE) (2000)
/Page-522001.png)
Oxygen Sensor: Testing and Inspection
Air/Fuel Ratio Sensor
Air-Fuel Ratio (A/F) Sensor
COMPONENTS
INSPECTION
1. INSPECT HEATER RESISTANCE OF A/F SENSOR
a. Disconnect the sensor connector.
b. Using an ohmmeter, measure the resistance between terminals +B and HT.
Resistance:
at 20°C (68°F): 0.8 - 1.4 ohms
at 800°C (1,472°F): 1.8 - 3.2 ohms
If the resistance is not as specified, replace the sensor.
Torque: 20 Nm (200 kg.cm, 14 ft.lb)
