Tacoma Regular Cab 2WD L4-2.4L (2RZ-FE) (2000)
/Page-627001.png)
Ignition Coil: Testing and Inspection
Except California Spec.:
INSPECT IGNITION COILS
a. Disconnect the high-tension cords from the ignition coils.
b. Disconnect the ignition coil connectors.
c. Inspect the secondary coil resistance.
Using an ohmmeter, measure the resistance between the high-tension terminals.
Secondary coil resistance:
Cold 9.7 - 16.7 kohms
Hot 12.4 - 19.6 kohms
If the resistance is not as specified, replace the ignition coil.
d. Reconnect the ignition coil connectors.
e. Reconnect the high-tension cords to the ignition coils.
