Tacoma Regular Cab 2WD L4-2.4L (2RZ-FE) (2000)
Fuel Pump Relay: Testing and Inspection
COMPONENTS
1. REMOVE CIRCUIT OPENING RELAY
2. INSPECT CIRCUIT OPENING RELAY
a. Inspect the relay continuity.
1. Using and ohmmeter, check that there is no continuity between terminals 1 and 2.
If there is continuity, replace the relay.
2. Check that there is continuity between terminals 2 and 4.
If there is no continuity, replace the relay.
3. Check that there is continuity between terminals 3 and 5.
If there is no continuity, replace the relay.