Tacoma Regular Cab 2WD L4-2.4L (2RZ-FE) (2000)
Repairs and Inspections Required After a Collision: Service and Repair
Air Bag System
REPAIRS AND INSPECTIONS REQUIRED AFTER A COLLISION
FRONT PASSENGER AIRBAG ASSEMBLY
1. VEHICLE NOT INVOLVED IN COLLISION
a. Do a diagnostic system check.
b. Do a visual check which includes the following items with the front passenger airbag assembly installed in the vehicle.
Check for cuts, minute cracks or marked discoloration of the front passenger airbag door.
2. VEHICLE INVOLVED IN COLLISION AND AIRBAG IS NOT DEPLOYED
a. Do a diagnostic system check.
b. Do a visual check which includes the following items with the front passenger airbag assembly removed from the vehicle.
-
Check for cuts and cracks in, or marked discoloration of the front passenger airbag door.
-
Check for cuts and cracks in wire harnesses, and for chipping in connectors.
-
Check for deformation of the instrument panel and instrument panel reinforcement.
HINT:
-
If the instrument panel or instrument panel reinforcement is deformed, never repair it. Always replace it with a new one.
-
There should be no interference between the instrument panel and front passenger airbag door, or the glove compartment door and front
passenger airbag door. The clearance should be uniform all the way around when the new airbag assembly is installed on the instrument