Tacoma Regular Cab 2WD L4-2.4L (2RZ-FE) (2000)
-
If the horn button contact plate of the steering wheel is deformed, never repair it. Always replace the steering wheel assembly with a new
one.
-
There should be no interference between the steering wheel pad and steering wheel, and the clearance should be uniform all the way
around when the new steering wheel pad is installed on the steering wheel.
CAUTION: Be sure to follow the correct procedure for removal and installation of the steering wheel pad.
REPLACEMENT REQUIREMENTS
In the following cases, replace the steering wheel pad, steering wheel or spiral cable
CAUTION: Be sure to follow the correct procedure for removal and installation of the steering wheel pad.
AIRBAG HARNESS
INSPECTION
HINT: The SRS wire harness is integrated with the instrument panel wire harness assembly. All the connectors in the system are a standard yellow
color.
1. VEHICLES NOT INVOLVED IN COLLISION
Do a diagnostic system check. *
2. VEHICLES INVOLVED IN COLLISION
a. Do a diagnostic system check. *
b. Check breaks in all wires of the SRS wire harness, and exposed conductors.
c. Check to see if the SRS wire harness connectors are cracked or chipped.
* Refer to SRS Warning Light Check, and How to Display and Read Diagnostic Codes.
AIRBAG SENSOR ASSEMBLY
VEHICLE NOT INVOLVED IN COLLISION
Check a diagnostic system.
VEHICLE INVOLVED IN COLLISION WITH AIRBAG NOT DEPLOYED
Check a diagnostic system. *