Tacoma Regular Cab 2WD L4-2.4L (2RZ-FE) (2000)
/Page-87002.png)
REPLACEMENT
1. REMOVE THROTTLE BODY
2. REMOVE CAMSHAFT POSITION SENSOR
a. Disconnect the sensor connector.
b. Remove the bolt and sensor.
3. REINSTALL NEW CAMSHAFT POSITION SENSOR
a. Install a new sensor with the bolt.
Torque: 5.4 Nm (55 kg.cm, 48 in.lb)
b. Connect the sensor connector.
4. REINSTALL THROTTLE BODY
