Tacoma Regular Cab 2WD L4-2.4L (2RZ-FE) (2000)
/Page-165003.png)
INSPECT REAR WIPER AND WASHER SWITCH CONTINUITY
If continuity is not as specified, replace the switch.
INSPECT WASHER LINKED OPERATION
a. Connect the positive (+) lead from the battery to terminal 16 and the negative (-) lead to terminal 2.
b. Connect the positive (+) lead from the voltmeter to terminal 7 and the negative (-) lead to terminal 2.
c. Push in the washer switch, and check that the voltage changes as shown in the table.
If operation is not as specified, replace the wiper and washer switch.
