Tacoma Regular Cab 2WD L4-2.4L (2RZ-FE) (2000)
Clutch Master Cylinder: Service and Repair
REMOVAL
1. DRAW OUT FLUID WITH SYRINGE
2. DISCONNECT CLUTCH LINE
Using SST disconnect the line. Use a container to catch the fluid.
SST 09023-00100
Torque: 15 Nm (155 kgf-cm, 11 ft. lbs.)
3. REMOVE CLIP AND CLEVIS PIN
4. REMOVE MOUNTING NUTS AND PULL OUT MASTER CYLINDER
Torque: 13 Nm (130 kgf-cm, 9 ft. lbs.)
DISASSEMBLY
1. REMOVE RESERVOIR TANK
a. Using a pin punch and hammer, drive out the slotted spring pin.
b. Remove the reservoir tank and grommet.