Tacoma Regular Cab 2WD L4-2438cc 2.4L DOHC MFI (1997)
Connecting Rod: Testing and Inspection
Connecting Rod Alignment
USING A ROD ALIGNER AND THICKNESS GAUGE, CHECK THE CONNECTING ROD ALIGNMENT
1. Check for out-of-alignment.
Maximum out-of-alignment: 0.05 mm (0.0020 inch) per 100 mm (3.94 inch)
If out-of-alignment is greater than maximum, replace the connecting rod assembly.
2. Check for twist.
Maximum twist: 0.15 mm (0.0059 inch) per 100 mm (3.94 inch)
If twist is greater than maximum, replace the connecting rod assembly.
