Tacoma Regular Cab 2WD L4-2438cc 2.4L DOHC MFI (1997)
Alternator Brush: Service and Repair
Brushes
REPLACEMENT
1. Unsolder and remove the brush and spring.
2. Run the wire of a new brush through the hole in the brush holder, and insert the spring and brush into the brush holder.
3. Solder the brush wire to the brush holder at specified exposed length.
Exposed length:
9.5 - 11.5 mm (0.374 - 0.453 in.)
4. Check that the brush moves smoothly in the brush holder.
5. Cut off the excess wire.
6. Apply insulation paint to the soldered area.