Tacoma Regular Cab 4WD L4-2.7L (3RZ-FE) (1999)
b. Remove the O-ring from the No.2 vehicle speed sensor.
7. INSTALL NO.2 VEHICLE SPEED SENSOR
a. Coat a new O-ring with ATF and install it to the No.2 vehicle speed sensor.
b. Install the No.2 vehicle speed sensor and torque the bolt.
Torque: 5.4 Nm (55 kgf cm, 48 inch lbs.)
8. CONNECT NO.2 VEHICLE SPEED SENSOR CONNECTOR