Tacoma Regular Cab 4WD L4-2.7L (3RZ-FE) (1999)
/Page-877001.png)
Camshaft Position Sensor: Testing and Inspection
INSPECTION CAMSHAFT POSITION SENSOR
a. Disconnect the camshaft position sensor connector.
b. Using an ohmmeter, measure the camshaft position sensor resistance between terminals.
Resistance:
Cold: 835 - 1,400 Ohms
Hot: 1,060 - 1,645 Ohms
If the resistance is not as specified, replace the camshaft position sensor.
c. Connect the camshaft position sensor connector.
