Tacoma Regular Cab 4WD L4-2.7L (3RZ-FE) (1999)
/Page-1618001.png)
Passenger Airbag Cutoff Switch: Testing and Inspection
1. INSPECT PASSENGER AIRBAG CUTOFF SWITCH CONTINUITY
HINT: Release the airbag activation prevention mechanism of the passenger airbag cutoff switch connector on the airbag sensor assembly side.
If continuity is not as specified, replace the switch.
2. INSPECT PASSENGER AIRBAG CUTOFF INDICATOR OPERATION
a. Check that continuity exists between 6 and 7.
b. Connect the positive (+) lead from the battery to terminal 1 and negative (-) lead to terminal 4.
c. Check that the indicator light lights up.
If the operation is not as specified, replace the indicator.
