Tacoma Regular Cab 4WD V6-3.4L (5VZ-FE) (1997)
/Page-409001.png)
Crankshaft: Testing and Inspection
Thrust Clearance
INSPECTION
Using a dial indicator, measure the thrust clearance while prying the crankshaft back and forth with a screwdriver.
Standard thrust clearance: 0.020 - 0.220 mm (0.0008 - 0.0087 inch)
Maximum thrust clearance: 0.300 mm (0.0118 inch)
If the thrust clearance is greater than the maximum, replace the thrust washers as a set.
Thrust washer thickness: 2.440 - 2.490 mm (0.0961 - 0.0980 inch)
