toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Evaporative Vapor Pressure Sensor > < Evaporative Emission Control Canister|Specifications|Page 3127
Page 2
background image

(e) While holding port F closed, apply vacuum (2.94 kPa 22 mm Hg, 0.87 in. Hg) to port D, check that the vacuum does not decrease when port

C is closed and check that the vacuum decreases when port C is released.
If a problem is found, replace the charcoal canister.

(f) Remove the plugs.

5. REINSTALL CHARCOAL CANISTER

Evaporative Vapor Pressure Sensor > < Evaporative Emission Control Canister|Specifications|Page 3127