Tacoma Regular Cab 4WD V6-3.4L (5VZ-FE) (1997)
Components For Removal And Installation Part 2 Of 2
COMPONENTS FOR REMOVAL AND INSTALLATION
FUEL PRESSURE REGULATOR REMOVAL
1. REMOVE AIR CLEANER HOSE
2. REMOVE INTAKE AIR CONNECTOR
3. DISCONNECT FUEL RETURN HOSE FROM FUEL PRESSURE REGULATOR
CAUTION: Put a shop rag under the pressure regulator.
4. REMOVE FUEL PRESSURE REGULATOR
(a) Remove holding bolt the engine wire to the LH cylinder head cover.
(b) Disconnect the protector from the bracket on the RH cylinder head cover and lift up the engine wire.