Tacoma Regular Cab 4WD V6-3.4L (5VZ-FE) (1997)
EGR Temperature Sensor: Testing and Inspection
EGR GAS TEMPERATURE SENSOR INSPECTION
Except Model No. VZN17O - 4wd Long Wheel Base
1. REMOVE EGR GAS TEMPERATURE SENSOR
2. INSPECT EGR GAS TEMPERATURE SENSOR
Using an ohmmeter, measure the resistance between the terminals.
Resistance:
At 50°C (122°F): 84 - 97 K ohms
At 100°C (212°F): 11 - 16 K ohms
At 150°C (302°F): 2 - 4 K ohms
If the resistance is not as specified. replace the sensor.
3. REINSTALL EGR GAS TEMPERATURE SENSOR
Torque: 20 N.m (200 kgf.cm, 14 ft.lbf)