Tacoma Regular Cab 4WD V6-3.4L (5VZ-FE) (1997)
/Page-1258001.png)
Clutch Slave Cylinder: Service and Repair
Replacement
REMOVAL
1. Disconnect clutch line.
Using Special Service Tool (SST) 09023-00100, disconnect the line. use a container to catch the fluid.
Torque: 15 N.m (11 ft. lbs.)
2. Remove 2 bolts and pull out release cylinder.
Torque: 13 N.m (108 inch lbs.)
INSTALLATION
Installation is in the reverse order of removal.
HINT: After installation, bleed clutch system.
