Tacoma Regular Cab 4WD V6-3.4L (5VZ-FE) (1997)
NOTICE: Do not scratch the serration of the speed sensor rotor.
5. w/ Free wheel hub: Install new lock nut.
a. Using SST 09318 - 12010, install and torque a new nut to the axle hub.
Torque to 274 Nm (203 ft. lbs.)
b. Using a chisel and hammer, stake the nut.
6. w/o Free wheel hub: Install bearing spacer. Using SST 09950-60010 (09951-00650), 09950-70010 (09951-07150) and a press, install the bearing
spacer.
7. Install new oil seal (Inside).
a. Using SST 09527-17011 and a plastic hammer, install a new oil seal (inside).
HINT: Strike the SST on its circumference evenly.
b. Coat MP grease to the oil seal lip.
Front Wheel Hub Bolt