Tacoma Regular Cab 4WD V6-3.4L (5VZ-FE) (1997)
/Page-1294006.png)
HUB BOLT REPLACEMENT
1. Remove front wheel.
2. Remove brake caliper and disc.
3. Remove hub bolt. Using Special Service Tool (SST), remove the hub bolt.
4. Install hub bolt.
Install a washer and nut to the hub bolt, as shown in the illustration, and install the hub bolt by tightening the nut.
5. Install brake disc and caliper.
6. Install front wheel.
Torque: 110 Nm (83 ft. lbs.)
Free Wheel Hub
