Front Wheel Fastener Service and Repair for Tacoma S-Runner 2WD V6-34L (5VZ-FE) (2001)
Wheel Fastener: Service and Repair
Rear
REPLACEMENT
1. REMOVE REAR WHEEL AND BRAKE DRUM
2. REMOVE REAR HUB BOLT
Using Special Service Tool (SST) and a brass bar or an equivalent, remove the hub bolt.
SST 09650-17011
3. INSTALL HUB BOLT
a. Install a washer and nut to a new hub bolt as shown in the illustration.
b. Using a brass bar or an equivalent to hold, install the hub bolt by torquing the nut.
4. INSTALL BRAKE DRUM AND REAR WHEEL
Torque: 110 Nm (1,150 kgf-cm, 83 ft. lbs.)