Tacoma S-Runner 2WD V6-3.4L (5VZ-FE) (2001)
a. Using a screwdriver and hammer, unstake the washer.
NOTICE: Avoid any impact to the steering rack.
b. Using a spanner to hold the steering rack steady, and using SST, remove the rack end.
SST 09922-10010
NOTICE: Use SST 09922-10010 in the direction shown in the illustration.
c. Remove the claw washer.
d. Employ the same manner described to the other side.
HINT: Mark the Right-Hand and Left-Hand rack ends.
6. REMOVE RACK HOUSING NO.2 BRACKET AND GROMMET
a. Place matchmarks on the bracket and rack housing.
b. Remove the bolt, rack housing No.2 bracket and grommet.
7. REMOVE RACK GUIDE SPRING CAP LOCK NUT
Using SST, remove the rack guide spring cap lock nut.
SST 09922-10010
NOTICE: Use SST 09922-10010 in the direction shown in the illustration.