Tacoma S-Runner 2WD V6-3.4L (5VZ-FE) (2001)
1. REPLACE FRONT EYE BUSHING
Using Special Service Tool (SST) and a press, replace the bushing.
SST 09550-10013 (09252-10010, 09553-10010)
HINT: When installing the bushing, as shown in the illustration.
2. REPLACE REAR EYE BUSHINGS
a. Using a saw, cut the both bushing tabs as shown in the illustration.
b. Using SST and a press, press out the both inner tubes and rubber parts of the bushings.
SST 09950-60010 (09951-00350) 09950-70010 (09951-07150)
c. Using a chisel and hammer, tap out the outer tubes.