Tacoma S-Runner 2WD V6-3.4L (5VZ-FE) (2001)
/Page-681003.png)
5. REMOVE 29 BOLTS
6. REMOVE UPPER VALVE BODY WITH PLATE AS A SINGLE UNIT
a. Hold the valve body plate to the upper valve body, and remove the upper valve body with the plate.
NOTICE: Be careful that the check balls and strainer do not fall out.
b. Turn over the upper valve body with the plate.
7. REMOVE OIL STRAINER
a. Remove the 3 oil strainers from the plate.
b. Remove the 2 gaskets from the plate.
8. REMOVE CHECK VALVE AND SPRING
9. REMOVE 10 CHECK BALLS
REASSEMBLY
