Tercel/Cor. Tercel L4-1452cc 1AC,3A,3AC (1984)
Timing Belt: Testing and Inspection
INSPECT TIMING BELT
CAUTION:
^
Do not bend, twist or turn the belt inside out.
^
Do not allow the belt to come into contact with oil, water or steam.
^
Do not utilize belt tension when installing or removing the set bolt of the camshaft timing pulley.
If there are any defects found, check the following points and replace the timing belt if necessary.
1. Premature parting.
^
Check for proper installation.
^
Check the timing cover gaskets for damage, and check for installation.
2. If the belt teeth are cracked or damaged, check to see if the camshaft, water pump or oil pump is locked.
3. If there is noticeable wear or cracks on the belt face, check to see if there are nicks on one side of the idler pulley lock.
4. If there is wear or damage on only one side of the belt, check the belt guide and the alignment of each pulley.
5. If there is noticeable wear on the belt teeth, check the timing cover gasket for damage and check for correct gasket installation. Check for foreign
material on the pulley teeth.
INSPECT IDLER PULLEY
