toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Mechanical Specifications|Page 673 > < Mechanical Specifications|Page 671
Page 2
background image

(b) Insert the SST blade between the cylinder block and oil pan, cut off applied sealer and then remove the oil pan.

SST 09032-00100

NOTICE:
^  Do not use SST for the oil pump body side and rear oil seal retainer.
^  Be careful not to damage the oil pan flange.

8.  REMOVE OIL STRAINER

Remove the 3 bolts and oil strainer with the 0-ring.

9.  REMOVE PRESSURE REGULATOR VALVE

10.  REMOVE OIL PUMP

(a)  Remove the 9 bolts and tension spring bracket.

Mechanical Specifications|Page 673 > < Mechanical Specifications|Page 671