Tercel Sedan 2-Door L4-1456cc 1.5L SOHC (3E-E) (1991)
(b) Loosen the No.1 idler pulley set bolt.
(c) Temporarily install the crankshaft pulley bolt and turn the crankshaft 2 revolutions from TDC to TDC.
HINT: Always turn crankshaft clockwise.
(d) Check that each pulley aligns with the marks as shown.
(e) Torque the No.1 idler pulley bolt.
Torque: 18 N.m (185 kgf-cm 13 ft-lbf)
(f) Check that there is belt tension at the position indicated in the illustration.