toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

EGR Valve Position Sensor > < EGR Valve|Locations
Page 1
background image

EGR Valve: Testing and Inspection

1. Remove EGR valve from the engine.
2. Check EGR pintle for carbon build-up and sticking. Use carburetor cleaner and compressed air to clean minor deposits.
3. Check the vacuum diaphragm for leaks with a handheld vacuum pump.
4. If a problem is found, replace the EGR valve.
5. Reinstall the EGR valve on the engine using a new base gasket.

EGR Valve Position Sensor > < EGR Valve|Locations