Tercel Sedan 2-Door L4-1456cc 1.5L SOHC (3E-E) (1991)
Fuel Return Line: Service and Repair
Installing Fuel Hoses
1. When connecting the union bolt (banjo fitting) on the high pressure fuel pipe, observe the following procedure:
a. Always use a new gasket.
b. Tighten union bolt by hand to start. This prevents cross-threading fitting.
c. Torque union bolts to 22 ft.lbs. (29 N-m).
2. When connecting a flare nut fitting on the high pressure fuel pipe, observe the following:
a. Apply a light coat of engine oil to the flare before installation.
b. Tighten flare fitting by hand to start. This prevents cross-threading fitting.
c. Torque the flare nut fitting to 22 ft.lbs. (30 N-m).
3. Install slip-on fuel hose on the fuel pipes according to the dimensions in the image.