Tercel Sedan 2-Door L4-1456cc 1.5L SOHC (3E-E) (1991)
/Page-605001.png)
Pick-Up Coil: Testing and Inspection
***UPDATED BY TSB# EN91-007, JUNE 1991
1.
Remove distributor cap.
Pickup Coil Resistance
2.
Disconnect primary ignition wire connector at distributor.
2.
Using an ohmmeter measure the resistance between NE- and NE+ wires.
Pickup Coil Resistance:
370 - 530 ohms
Pickup Coil Air Gap
3.
Using a non magnetic feeler gauge, measure the gap between the signal rotor and the pickup coil projections.
Pickup Coil Air Gap:
0.008 - 0.016 in (0.2 - 0.4 mm)
4.
The air gap is not adjustable. If any of the above test results are outside specifications, replace distributor assembly.
