Tercel Sedan 2-Door L4-1456cc 1.5L SOHC (3E-E) (1991)
/Page-696003.png)
c. Using SST and a press, install the rear ball bearing.
SST 09608 - 12010 (09608 - 00070)
6. INSTALL SNAP RING
a. Select a snap ring that will allow minimum axial play.
b. Using a screwdriver and hammer, tap in the snap ring.
7. MEASURE FOURTH GEAR THRUST CLEARANCE
Using a feeler gauge, measure the 4th gear thrust clearance.
