Tercel Sedan 2-Door L4-1497cc 1.5L DOHC (5E-FE) (1995)
/Page-262001.png)
Brake Bleeding: Service and Repair
Bleeding the Brake System
CAUTION: Do not let brake fluid remain on a painted surface. Wash it off immediately.
NOTE: If any work is done on the brake system or if air is suspected in the brake lines, bleed the system of air.
Filling Brake Reservoir With Brake Fluid
BRAKE FLUID BLEEDING
1. Fill brake reservoir with brake fluid.
Fluid: SAEJ17O3 or FMVSS No.116 DOT 3
2. Bleed Master Cylinder.
NOTE: If the Master Cylinder has been disassembled or if the reservoir becomes empty, bleed the air from the Master Cylinder.
(a) Disconnect the brake lines from the Master Cylinder.
Depressing Brake Pedal To Bleed Master Cylinder
(b) Slowly depress the Brake Pedal and hold it.
Blocking Off Outlet Plug
(c) Block off the outlet plugs with your fingers, and release the brake pedal.
(d) Repeat (b) and (c) 3 or 4 times.
